Fishing is one of those activities that seems fairly simple, but you’ll find yourself struggling with it at first. There are plenty of things to remember when fishing, and putting the correct kind of line on your pole is one of them. It may seem silly, but there’s more to putting the line on the pole than you might think. You need specific measurements, techniques, and tricks to ensure the line stays secure and does not compromise your ability to catch fish. If you’re reading this article because you have trouble with putting a fishing line on a pole – don’t worry! It’s tricky for many people at first. Thankfully, once you know the right way to do it, it becomes fairly easy after that. Let this article serve as your guide!
Step 1: Determine the Length of Your Line
The first step to putting a fishing line on a pole is determining the correct length of the fishing line. This is essentially the amount of line that will go from your rod to your hook. The length of the fishing line you use can make a significant difference in the quality of your fishing experience. The rule of thumb for fishing line length is this: if you’re fishing in deep waters, you’ll have a longer line than if you were fishing in shallow waters. In general, you should aim for at least 15 feet of line – that’s how much you’ll need to fish in shallow waters. If you’re fishing in deep waters, you can double that amount. The more line you have, the more likely you are to catch fish.
Step 2: Cut the End of Your Fishing Line to Match
Next, you’ll need to cut the end of your fishing line to match the length you just determined in the previous step. When you do this, you want to cut the line so that the last bit of it is even with the top of the reel. You don’t want the line to be any longer than that, or else it might end up spilling over the sides and making a mess. You’ll also want to cut the line so that it doesn’t fall below the level of the spool – that way, it will easily feed onto the reel. If you have a spinning reel, you’ll want to cut the line so that the last bit is even with the top of the reel. If you have a fixed-spool reel, you’ll want to cut the line so that the last bit is even with the bottom of the reel.
Step 3: Install Your Hook at the End of the Line
You don’t want to put the line on the reel just yet. Before you do that, you need to put the hook on the end of the line. Most fishing hooks are designed for you to put them on the line by pushing the pointy end into the line. Then, you’ll want to push the rest of the hook down until the pointy end is three-quarters of an inch from the end of the line. You’ll want to be careful when you do this, however. You don’t want to push the hook too deep into the line – you only want to push it halfway down. If you push it too deep, you’ll end up with too much line in the hook’s barb. This will make it very difficult to remove the hook from the fish’s mouth when you catch one.
Step 4: How to Hold Your Pole When Installing Line
There’s one last thing you need to do before you put the fishing line on your pole. You want to put the reel under the line so that you can use your thumb to reel the line onto the spool. To do this, you’ll want to hold the reel with your hand and put the line over it. Make sure the line is about an inch away from the reel’s edge. Then, put your hand around the pole and lift the line over the top of the rod until you get it to the correct level. You’ll also want to make sure to keep the line away from the pole’s joint. The last thing you want is for the fishing line to get caught in the joint!
Final Words
Fishing can be a very enjoyable experience, especially when you’re able to bring home a nice fish for dinner. It can be a little tricky to get everything right at first, but don’t worry – once you know what you’re doing, it’ll be easy! Remember to put your line on the correct length and to use the right amount of pressure when putting the fishing line on a pole. You’ll be a pro in no time!